The MD-1200 Micro-Drop Dispenser provides a cost effective solution when flood cooling is impractical or unavailable. When used in milling, tapping, and sawing applications, the MD-1200 dispenses small amounts of Micro Drop Synthetic or Vegetable based lubricant. Compared to flood cooling, there is no coolant sump to maintain or used coolant to dispose of.
Solenoid versions allow these units to be interfaced with CNC controls or other signaling devices. The pressurized delivery system of the MD-1200, provides instant on/off performance when used with the solenoid control.
High energy nozzle design eliminates fogging for cleaner environment & greater chip clearing power, allowing faster feeds & speeds
- Individual, high resolution, air and liquid controls offer flexibility, in different set-ups
- Independent line adjustment
- Positive pressure design gives instant fluid delivery for faster cycle times
- Lifetime warranty on manufacturing defects
|NO. OF LINES||1|
|LENGTH OF LINE||6'|
|STYLE||2 Lines - Manual On/Off|
|AIR CONSUMPTION||1.7 CFM/line|
|AIR INLET SIZE||1/4" NPT|
|DELIVERY LINE LENGTH||6'|
|INLET AIR PRESSURE||60-125 PSI|
|LIQUID FLOW RANGE||2 - 16 drop/minute|
|LIQUID VISCOSITY||50 - 200 SUS|
|RECOMMENDED FILTER STRENGTH||40 micron|
Be the first to review this product.
- In Stock
- Calculated at Checkout