Servo Power Feed, 140 lbs. Torque, Milling Table "X" Feed - M-200-140

$864.00 $775.00

Reviews (0)

SKU:: GSP-M-200-140

Ships From Mfr.

Description
Reviews
Additional Info

Description

GO HERE to shop all models of Servo 140 Power Feeds, THIS IS FOR A BRIDGEPORT SERIES I (and others see below)

If you don't see the correct model for your machine please call 317-662-0185 or Request a Quote

Powerfeed comes with everything you will need to mount the unit to your machine (bracket and brass gear included). This is only for Bridgeport (Hand Feed), Brute 9x42,9x49, Jet 1048VS, Manford, Select 1VBVS, South Bend Import, Summit EVS-350 Mills.

Type 140 - for Table Feed

-The type 140 is a half-sine wave control that gives better power and durability. It is the choice of the two types for applications on the knee of the mill

-Semi-automated machining on Class 1 mills to 3 hp.

-Peak torque (half-wave series motor): to 140 in-lb / 15.8 N×m torque

-Intermittent torque: 105 in-lb / 11.9 N×m

-Continuous torque: 90 in-lb / 10.2 N×m

-Variable feed rate: .75-25 ipm / 19-635 mm/min. (table and cross); 0-12 ipm / 0-305 mm/min. (knee).

-Rapid traverse: 35 ipm / 889 mm/min. (table and cross); 12 ipm / 305 mm/min. (knee).

-Gear reduction ratio (motor to screw shaft): 72:1.

-Helical gearing and torque limiting friction safety clutch.

-Electrical: 110V, 50/60 Hz, 2.5 Amps.

-Approximate weight: 15 lb. / 6.8 kg.

NOTE: Servo Products Company has made every effort to provide mounting hardware kits that are as accurate and complete as possible for each machine model. However, machine builders may change their designs without letting us know. Therefore, some kits may not fit properly. Please let us know when this happens.

Reviews