The MPO-VP glass linear encoder (glass scale) is intended to be a direct replacement for the Heidenhain LS487 Encoder. The encoder provides a 1Vpp output in either 3 or 5 micron accuracy grade and 0.1 or 0.2 micron resolution. Distance coded reference marks are optional. Travel lengths up to 2040mm (80.3") available.
Note: When requesting a quote please specify the travel length, accuracy grade, cable length, and connector type. When ordering please specify the required output signal and resolution, the measuring length, reference mark type, accuracy, cable length, connector type, and mounting spar. See downloadable data sheet for more information.
The Newall Advantage
- Replace your Heidenhain LS487 Encoder for a fraction of the cost
- Improved availability compared to Heidenhain
Quick and Easy Installation
The design of these glass linear encoders allow the user to quickly install this scale into the same envelope as the like Heidenhain scale at a fraction of the cost.
|Accuracy/Meter||±0.0002" (±5µm) or ±0.00012" (±3µm)|
|Resolutions||Depends on external subdividing electronics|
|Scale Travels||70mm to 2040mm|
|Grating Period||20µm (40µm optional)|
|Reader Head Dimensions||84mm x 18mm|
|Reference Marker||Every 50mm, distance coded, none|
|Maximum Traverse Rate||1m/s, 0.5m/s, 0.4m/s|
|Power Supply||5VDC ±5%, <120mA|
|Environmental Rating||IP53, IP64 with compressed air|
|Operating Temperature||0° to 50°C|
|Overall Scale Length||Scale travel length + 105mm|
|Standard Cable||3m non-armored|
|Maximum Cable Length||82' (25m)|
|Standard Connector||Flying leads|
Be the first to review this product.
- Call for Lead Time